9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
Transmission Position Switch/Sensor: Service and Repair
To Remove
1
Remove the center console.
2
Disconnect the front air duct under the center console by removing the plastic clips. Press the air duct forward (in the car) and remove.
3
Remove the rear floor duct screw and push the duct back to gain better access.
4
Push the seat to its furthest back position.
5
Unplug the connector.
6
Remove the transmission range switch.
To Install
Important
Conduct a function test on the transmission range switch before installation.
Installation is in reverse order.