9000 CSE L4-2290cc 2.3L DOHC Turbo EFI (1995)
Alarm Module: Service and Repair
Electronic Control Module
Electronic control module, EU
1
Cars without passenger airbag
Remove the glove compartment and air distribution damper.
Cars with passenger airbag
Remove the complete airbag, including the bracket and the air distribution damper.
2 Carefully push up the air duct on the passenger side.
3
Drill out the pop rivet securing the electronic control module. Use a drill with a drilling stop.
4
Remove the two screws on the electronic control module (from underneath). Lift out the electronic control module.
5
Drill out the screws on the electronic control module casing and remove the lid. Pull Out the plate between the electronic control module and the
bracket
6
Unplug the connector to the electronic control module.
7
Install in reverse order