9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
-
The sensor can be reconnected (before the anti-theft alarm is armed) by turning the ignition switch to the ON position (+15).
-
Otherwise, it is necessary to disarm the alarm and then arm it again so that the sensor will be connected with the rest of the alarm.
Automatic disconnection
The sensor is automatically disconnected in the following cases:
-
If the theft alarm is disarmed.
-
If the tailgate alone is disarmed/unlocked.
-
If a door or the tailgate is open on arming the alarm.
-
If the voltage drops to lower than +8.5 V.