9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
Traction Control Module: Service and Repair
Location
-
The TCS control module is located under the lefthand front seat.
Removal
1
Raise the seat and push it as far forward as possible.
2
Remove the two clips securing the carpet and fold it up.
3
Remove the two screws securing the rear control module attachment and remove the cover cap.
4
Remove the three nuts securing the control module attachment.
5
Lift up the control module attachment, unplug the control module connector and lift out the control module.
Installation
-
When fitting, ensure that the wiring is correct.
-
Program the control module with the correct gearbox using the ISAT.
-
Otherwise, fitting is in reverse order.