9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
/Page-608002.png)
INSTALLATION
1. Clean the surfaces and fit the exhaust manifold complete with new gasket. Tightening torque 20 Nm (15 ft. lbs.).
2. Connect the secondary air injection pipes and refit the heat shield and the dipstick. Raise the car.
3. Thread in the front exhaust pipe and bolt it to the exhaust manifolds. Use new gaskets. Tightening torque 40 Nm (30 ft. lbs.).
4. Bolt the joints together under the car and lower the car.
5. Connect the oxygen sensor cables.
