saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Driver/Vehicle Information Display|Description and Operation > < Diagram Information and Instructions|Page 6187
Page 9
background image

H8-4

By the left-hand rear wheel housing.

10-Pin Connectors

H10-22

In the right-hand B pillar.

H10-24

In the left-hand B pillar.

22-Pin Connectors

H22-1

Behind the cable entry in the left-hand A pillar.

H22-2

Behind the cable entry in the right-hand A pillar.

Grounding Points

G5

Grounding point, rear seat, under the left-hand part of the seat.

G6

Grounding point, negative distribution terminal, in main fuse box behind the glove box.

G8

Grounding point, dashboard, beside the front left-hand speaker socket.

G24

Grounding point, on the right-hand front seat member.

DESCRIPTION OF OPERATION

The part of pictogram 213 that covers door indication alerts the driver if any of the doors is not properly closed.

When the ignition switch is in the Drive position, positive current is supplied to terminal 5 of the pictogram and via lamps f, g, d, e and j for each
door to the door switch in question.

If any door is not completely closed, corresponding door switch 208 will be closed, connecting the circuit for the associated lamp to ground and
thus causing it to light up.

If the tailgate is not completely closed, luggage compartment switch 56 will be closed and lamp j will light up.

FAULT DIAGNOSIS HINTS

Door indication is activated by turning the ignition switch to the Drive position.

1. Check that current is supplied to terminal 5 of pictogram 213.
2. Check that the door switches are in proper working order.
3. Oheck that the luggage compartment lighting switch is in proper working order.
4. Check the connectors, wiring harness and ground connections.

Driver/Vehicle Information Display|Description and Operation > < Diagram Information and Instructions|Page 6187