9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
/Page-685001.png)
Oxygen Sensor: Service and Repair
Oxygen Sensor, Front Bank
To Remove
1. Raise the car.
2. Unplug the sensor's connector.
Note how the wiring harness is run before removing it.
3. Remove the two clips securing the wiring.
4. Remove the sensor.
To Fit
Before refitting, lubricate the sensor with MOLYCOTE 1000 or the equivalent.
Tightening torque: 55 Nm (40 ft lbs).
Fit in reverse order.
