9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
REMOVAL
Press out the bush by fixing a regular screw through the bush and on the other side of the bush place a spacer (sleeve No. 24), fitting sleeve and the nut
from tool 89 96 274.
INSTALLATION
1. Clean the bush seating and lubricate with Vaseline.
2. Lubricate the rubber bush and also the compression tool with Vaseline.
3. Compress the bush.
4. Position the bush with the compression tool, screw (regular screw for the damper lower mounting), spacer (sleeve No. 24) and nut and fitting
sleeve from tool 89 96 274. Press in the bush.