9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
19. First secure the clutch case and the gear case lightly with two screws.
-
Then tap up the guide sleeves.
-
Install the screw for the reverse shaft; if necessary, push it with a narrow screwdriver to guide the screw to the hole in the gear case.
-
Install remaining screws.
-
Tightening torque: 20-28 Nm (15-21 ft. lbs.)
20. Install the bearing on the output shaft and pull it down with the screw press.
-
Do not pull it all the way down to the bottom against the outer bearing race.