9000 CSE V6-2962cc 3.0L DOHC (B308) (1996)
Shift Interlock Switch: Service and Repair
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
Removal
NOTE: When removing the micro switch, the selector housing must first be removed.
1. Place the selector housing in a vice.
2. Detach the lefthand indicator switch.
3. Unplug the 2 pin connector and remove the cable from the connector.
4. Remove the 4 pin connector from the selector housing and extract pin 2 (blue lead) and pin 3 (black lead).
5. Cut the cable tie.
6. Undo the 2 screws for the micro switch and remove it with its cable.
Installation
1. Insert the microswitch cables through the hole in the selector housing. Install the microswitch with the 2 screws.