900 S Convertible L4-2290cc 2.3L DOHC (1996)
To Install
1. Check the condition and positioning of the O-ring.
2. Refit the throttle body and tighten the retaining screws.
-
Tightening torque: 8 Nm (6 ft lbs).
3. Refit the throttle position sensor.
4. Check the setting of the throttle valve, see Fig. If necessary; adjust it by slackening 2 screws and then moving the bracket in the desired direction.
5. Reconnect all hoses as well as the throttle cable and Cruise Control cable, if fitted.
6. Refit the IAC valve.
7. Refit the resonating chamber.
8. Check functionality.
