900 S Convertible L4-2290cc 2.3L DOHC (1996)
INSTALLATION
1. Use special tool No. 78 41 067 and install the new bearing in the support bearing bracket (8).
2. Install the circlip.
3. Use sleeve (9) No. 78 41 067 and press the bearing bracket with bearing onto the shaft.
4. Install the circlip and sealing ring. Make sure that the circlip is fitted the right way round (10).
5. Install the support bearing bracket and intermediate shaft correctly in the body.
6. Install the support bearing bracket on the locating studs (6).
7. Install the bolts and tighten them (7).
8. Move the alternator back into position (2), install the alternator bolt (1) and tighten it.
9. Install the drive shaft.
10. Reconnect the negative battery cable.
