900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Showa evaporator
On Showa evaporators, the cooling plate on which the fan control is mounted is screwed to the evaporator.
Important
The aluminium spacer supplied with the fan control unit is not to be used.
Wipe away old silicon paste from the mounting surface on the evaporator.
Apply a thin coat of silicon paste, part no. 30 07 895 on the metal plate on the fan control unit and the screwed plate on the evaporator. This is
important for the function and service life.
Make sure the two sleeves on the fan control unit fit into the holes in the mounting surface of the evaporator. Screw the fan control unit to the evaporator.
Plug in the connector.
Check the fitting and replace all removed parts, see "8. Climate control, Adjustment/replacement, Fan control unit".
Warranty/Time information
Failed Object: 87076
Fault/Reason code: 71
Location code: 01
Warranty Type (US): 01
Repair/Action code: 01
Labour Operation (US): 87076
(Labor Op. CA: D0540 0.2 hrs.)
Time: 0.2