900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Rear window wiper
General
1
Check that fuse 8 is intact and live.
2
Plug in the ISAT scan tool and select "READ FAULT CODES" from the menu. If any diagnostic trouble codes are present, continue in Trouble
Code Tables.
3
Check whether a 12 V power supply is present on:
-
pin 3 of the switch connector.
-
pins 86 and 87 of the connector for the rear intermittent operation relay holder.
-
pin 3 of the rear wiper motor connector.
-
If no power supply is present, check the wiring for continuity/shorting.
4
Check the grounding by taking a reading between pin 1 of the rear window wiper connector and a good grounding point.