900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Integrated Central Electronics (ICE) Control Module: Testing and Inspection
Test Readings, Control Module Connections
Preliminary Information
The following charts contain data and instructions for measuring voltage levels on the Integrated Central Electronics (ICE) control module.
Remember:
-
All readings should be obtained with the use of a Breakout Box (BOB) connected between the control module and the control module connector.
-
Several voltage levels should be regarded as guiding values only. Use your common sense when judging whether a particular reading is correct or
not.
-
If a test reading is wrong, consult the wiring diagram to find out which cables, connectors or components should be checked further.
-
All test readings are with the engine at normal operating temperature.
-
Unless otherwise stated, the ignition should be switched on.
-
Specified readings are for calibrated Fluke 88/97.