900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Control Module: Description and Operation
Control Module Power Supply
BATTERY VOLTAGE (+30 CIRCUIT)
-
The transmission control module is continuously supplied with battery voltage (+30 circuit) on pin 18. The control module uses this voltage as a
back-up for the memory. Current consumption on back-up is less than 1 mA.
BATTERY VOLTAGE (+15 CIRCUIT)
-
When the ignition switch is in the Drive position, the transmission control module is supplied with current (+15 circuit) on pin 17. This current is
necessary in order to activate the control module.