900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
3
If this is not the case, check the wiring between the ICE control module and the engine management system control module (both control modules
unplugged) for continuity/shorting.
4
Plug in the engine management system control module and repeat point 2.
A reading of 0 V should be obtained when "ON" and 12 V when "OFF".
It the voltage reading is OK, the fault is in the engine management system. Continue fault diagnosis as described in "Powertrain Management".
See: Powertrain Management
If the voltage reading is not OK, continue on "Before Changing an Electronic Control Module".
Direction Indicators