900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Interior Lighting, Front Reading Lamps
1
In the event of a fault in any individual lamp, check the fuse and the bulb.
2
Unplug the switch from the interior lighting connector and ground pins 1 and 3.
3
If the lamps do not light up, check the wiring between the fuse and the lamps, and also between the lamps and the switch, for continuity/shorting.
4
Connect a jumper lead between pins 4 and 1 of the switch connector and also between pins 5 and 3. If the lamps light up, change the switch.
5
Check the wiring between pin 4 of the switch connector and pin 23 of the Integrated Central Electronics (ICE) module, and also between pin 5 of
the switch connector and pin 46 of the ICE module, for continuity/shorting.