900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
5
If the headlamp flasher does not work in point 2, check the lead between dipswitch connector pin 1 and filament monitor connector pin 56A.
6
If the fault persists after the above checks have been carried out, continue fault diagnosis as described on "Before Changing an Electronic Control
Module".
Lights switch
1
Check the lights switch by selecting "READ SWITCHES" from the menu and then "LIGHTS SWITCH".
Turn the lights switch from position 0 to position 2. The display should then show:
"POS. 0"
"POS. 1"
"POS. 2"