saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Technician Safety Information|Page 5262 > < Air Bag(s) Arming and Disarming|Service and Repair
Page 1
background image

Air Bag: Technician Safety Information

WARNING:  When working on the SRS, the following points must be followed:

^

All work must be undertaken with the utmost care. There is a danger of personal injury if handled incorrectly.

^

Always disconnect the negative lead from the battery before working on the SRS.

^

Components that are part of the system may not be dismantled or repaired. They must be handled with care and stored in a dry place at room
temperature.

^

The belt tensioners must not be treated with grease, cleaner etc.

^

Airbags must be stored at room temperature. At higher temperatures the airbags will age and at temperatures over +135°C there is a danger of
self-detonation.

^

The belt tensioners must never be exposed to temperatures over +100°C.

^

Airbags should be stored in a special place, away from storage areas for petroleum products or other flammable materials.

^

Airbag and belt tensioners are classed as pyrotechnical items and should be stored and handled in compliance with the laws and regulations of
each country.

^

Airbags and belt tensioners must be fitted immediately after they have been collected from the store. It work is broken off, the airbag or belt
tensioner should be returned to the stores and locked away. Under no circumstances may an airbag or belt tensioner be left unattended.

^

Airbags must be stored and carried with the metal cover facing downwards to avoid injury in the event of accidental detonation.

^

Belt tensioners which have been dropped more than 0.5 meters onto a hard surface must not be used.

^

Use protective goggles and gloves when removing a detonated airbag. Place the airbag in a tightly sealed plastic bag. Wash hands in mild soap
solution and warm water after handling a detonated airbag.

Technician Safety Information|Page 5262 > < Air Bag(s) Arming and Disarming|Service and Repair