900 S Coupe L4-1985cc 2.0L DOHC Turbo EFI (1998)
Installation
1. Make sure that the seal is mounted on the master cylinder and install the master cylinder on the bracket.
-
Tightening torque: 24 Nm (18 ft. lbs.).
2. Position the righthand part of the clutch pedal bracket with master cylinder on the bulkhead partition and the clutch pedal's bolt.
3. Install the nut on the clutch pedal bolt but do not tighten it.
4. Check that the clutch pedal spring is correctly installed.