900 S Coupe L4-2290cc 2.3L DOHC (1995)
WARNING
It is important that the ends of the springs are in the correct position.
7.
Tighten the bolt to 6 ft.lbs. (8 Nm).
8.
Check that the 0-ring on the inlet (pressure) pipe is not damaged and is correctly positioned. Grease the 0-ring with acid-free Vaseline (available at
local drug stores).
9.
Reassemble all components removed during this procedure and refit cover.
Warranty Information
When submitting a claim for Recall 705, the following information must be included on the claim:
Failed Object: 10705
Fault/Reason: 81
Location: 0
Warranty Type (US Only): 05 RECALL ACTION CODE (RAC) = 3
Repair/Action: 01
Labor Operation/Time: 10705 0.4 hrs.
The following information must be added to your DCS Tables:
FAILED PART TABLE:
FAILED OBJECT: 10705
DESCRIPTION: THROTTLE LEVER BUSHING REPL.
MODELS: D
OPERATION NUMBER TABLE:
LABOR OPERATION: 10705
DESCRIPTION: THROTTLE LEVER BUSHING REPL.
TRANS. TYPE: B
ENGINE TYPE: 1
DIAGNOSTIC CODE REQD: 0
M94- 900 ONLY
HOURS: 0.4 HRS.
BEGIN YR.: 94
END YR: 98
Stamping the Campaign Plate
After the car has been modified, mark the campaign plate in position B3 for 1994 models, position B2 for 1995-1996 models and position B1 for 1997
models using a numeral "8" (Saab Special Tool PIN 02 97 713). Order this special tool directly from Kent-Moore at 1-800-345-2233.