saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 9350 > < Diagram Information and Instructions|Page 9348
Page 12
background image

353

Radio/cassette player, in centre of dashboard.

355

CD player, in the luggage compartment on the left-hand side.

375

Mobile telephone connection.

(H6-2)
540

Main instrument display panel on the dashboard.

541

SID unit in centre of dashboard. 

2-pin connector

H2-43

Connector for motorized aerial in the luggage compartment, on the left-hand side.

10-pin connector

H10-4

On the bracket below the left-hand A pillar.

33-pin connector

H33-1

Grey connector on the bracket below the left-hand A pillar.

Grounding Points

G27

Grounding point, motorized aerial, on the aerial bracket.

G33P

Grounding point, connector bracket (Power) below the left-hand A pillar.

G34P

Grounding point, control module bracket (Power) below the right-hand A pillar.

DESCRIPTION OF OPERATION

A factory-fitted audio system is available for cars supplied to certain markets. It contains the following components:
^

Radio/cassette player 353

^

Loudspeakers 266

^

CD player 355 (option)

^

Motorized aerial 265

Power Supply
^

Radio/cassette player 353 is supplied with +30 circuit current on pin 4 of connector A and with +X circuit current (trigger signal) on pin 7 of
connector A.

^

CD player 355 is supplied with current via radio/cassette player 353.

Grounding
^

Radio/cassette player 353 is grounded on pin 8 of connector A.

^

CD player 355 is grounded via radio/cassette player 353.

Radio/Cassette Player 353
The radio/cassette player has no radio display of its own but uses the SID unit's display for radio indication.

The radio/cassette player features AVC which uses speed information from main instrument display panel 540 to increase or reduce the volume
when speed is increased or reduced.

If a mobile telephone is installed in the car, it can be connected so that the volume of the radio is lowered when the telephone is in use.

The "Mute" signal of the mobile telephone is then connected to terminal 2 (connector A) of the radio/cassette player.

The front and rear loudspeakers are wired in connector B of the radio/cassette player as follows:

L front
Pin 5: +
Pin 6: -

R front
Pin 3: +
Pin 4: -

L rear
Pin 7: +
Pin 8: -

R rear
Pin 1: +

Diagram Information and Instructions|Page 9350 > < Diagram Information and Instructions|Page 9348