900 S Sedan V6-2498cc 2.5L DOHC (1995)
Alarm Module: Service and Repair
Antenna For Remote Control
1
First detach the negative lead (-) from the car battery.
2
Remove the control module as previous instructions.
3
Unplug the connectors to the control module.
4
Pull out the leads with pins (2) in the antenna connector.
5
Undo the binding around the cable assembly. Pull apart the cable assembly (to gain access to the antenna leads) and remove, the antenna.
Important: Remember that the new antenna is installed in the same way as the old one.
6
Install in reverse order.