900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
1. Clean the cylinder bore.
2. Rinse out cylinder and blow it dry.
3. Check that the passage holes are free from dirt.
4. Lubricate the seals with brake fluid.
5. Press the secondary piston into the cylinder, install the lock pin and put the cover washer in place.
6. Press the primary piston and seals into the cylinder.
7. Install the circlip.
8. Fasten the fluid reservoir onto the master cylinder.
9. Install the master cylinder to the brake servo unit.
