900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
Vacuum Brake Booster: Service and Repair
Removal
1. Remove the bar fixed between the spring struts.
2. Remove the air canister over the throttle body.
3. Disassemble the master cylinder.
4. Remove the vacuum hose from the brake servo.
5. Disconnect the electrical distribution box and move it out of the way to improve access.
6. Remove the brake servo retaining nuts from the bracket.
7. Remove the rubber gaiter from the bulkhead partition and pull it towards the servo container.
8. Undo the clip on the push rod and lift out the brake servo container.