900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
Air Door Actuator / Motor: Service and Repair
Installation
NOTE: On initiating calibration, all previous trouble codes will be cleared. Before starting calibration, a readout must be obtained of all trouble codes
stored in the memory.
1. Plug in the connector.
2. Install the stepping motor in place and tighten the two screws.
3. Refit the floor air duct.
4. Refit the panel on the side of the centre console.
5. Refit the glove box.
6. Calibrate the ACC system by pressing the "AUTO" and "OFF" buttons simultaneously.