900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
Cabin Temperature Sensor / Switch: Service and Repair
Installation
NOTE: On initiating calibration, all previous trouble codes will be cleared. Before starting calibration, a readout must be obtained of all trouble codes
stored in the memory.
1. Plug in the connector.
2. Install the indoor temperature sensor in place.
3. Install the cover in place.
4. Install the ACC control module back in place.
5. Calibrate the ACC system by pressing the "AUTO" and "OFF" buttons simultaneously.
