saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

High Pressure Safety Valve HVAC > < Heater Core|Service and Repair|Page 5339
Page 3
background image

-

Refit the rear air vent and cover. Refit the rear ashtray.

-

Refit the cover round the ignition switch.  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair

-

Refit the panels on both sides of the centre console.  See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair

-

Refit the glove box.  

5. Refit the coolant hoses on the heater box and tighten the hose clips.
6. Fill up with coolant
7. Bleed the system as follows (V6 engine only):

Fill the system to the MAX level, refit the pressure cap, start the engine and warm it up, preferably at varying speeds, until the radiator fan cuts in.

Remove the pressure cap and top up to the MAX mark.

Refit the pressure cap and run the engine at varying speeds until the radiator fan cuts in three more times. Switch ofl the engine and top up to the
MAX level as necessary.

High Pressure Safety Valve HVAC > < Heater Core|Service and Repair|Page 5339