saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Checking Toe-In|Page 969 > < Checking Toe-In
Page 2
background image

6. Use the table as shown in the following example:

a. Fix the steering wheel in the straight ahead position.
b. Assume the tracking gauge gives a reading of 0.5 toe-out.
c. Find this figure in the toe-out part of the table. This means that the adjusting screw must be turned counterclockwise barely 1/8th of a turn on

each side. Tightening torque, locking bolt: 22 Nm (16.2 ft. lbs.)

NOTE:  Turn the adjusting screw by an equal amount on both sides of the car.

Checking Toe-In|Page 969 > < Checking Toe-In