saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Saab 900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)|Fluids > < Mechanical Specifications|Page 1043
Page 1
background image

Hose/Line HVAC: Description and Operation

CAUTION:  If connections in the A/C system are open, they must be plugged in order to prevent moisture from entering the system. There are specially
made plugs for this which can be ordered.

Hoses, Pipes And 0-rings

The hoses have butyl rubber on the inside and an outside made of EDPM rubber. The hoses are equipped with heat protection where necessary.

The high-pressure pipe between the receiver and expansion valve and the low-pressure pipe between the expansion valve and compressor are
divided as spares to make them easier to install.

The 0-rings are made of a special type of chloroprene rubber (neoprene). They should be lubricated with synthetic vaseline before they are fitted in
the A/C system. When fitting A/C components, always install new 0-rings.

Saab 900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)|Fluids > < Mechanical Specifications|Page 1043