900 SE Hatchback L4-1985cc 2.0L DOHC Turbo EFI (1997)
5. Plug in the connector to the glove compartment lighting and refit the glove compartment.
6. Install the expansion rivet, securing bolt, securing screws and the cover on the glove compartment.
7. Refit the negative battery lead and switch on the ignition.
8. Connect the ISAT to the data link connector under the facia and erase any diagnostic trouble codes.
-
Switch off the ignition and switch it back on again. Wait for at least 10 seconds with the ignition on.
-
Check to see if a diagnostic trouble code is displayed.
-
If a diagnostic trouble code is displayed: Conduct the appropriate fault diagnosisSee: Testing and Inspection/Initial Inspection and Diagnostic
Overview.
-
If no diagnostic trouble code is displayed: Refit all parts that have been removed.
