saab Workshop Repair Guides

Saab Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Transmission Temperature Sensor/Switch: Service and Repair

 
Removal

1. Unplug the temperature sensor's cable.
2. Remove the two screws securing the cover plate.

NOTE: Fluid will run out of the transmission.

3. Unscrew the fluid temperature sensor.

Installing

1. Screw the fluid temperature sensor in place.

Tightening torque: 25 Nm (18.5 ft lbs).

2. Refit the cover plate and tighten the screws.

Tightening torque: 25 Nm (18.5 ft lbs).

3. Plug in the fluid temperature sensor's cable.

IMPORTANT:  Check the level of the fluid after refitting the temperature sensor.

Transmission and Drivetrain > Transmission Control Systems > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Temperature Sensor/Switch, A/T > Component Information > Specifications > Page 4263

< PREV PAGE NEXT PAGE >