900 SE Sedan V6-2498cc 2.5L DOHC (1995)
Checking The Voltage
1. Disconnect the load.
2. Connect the voltmeter's negative lead to a good grounding point.
3. Connect the voltmeter's positive lead to the connector pin that is to be checked.
4. If the voltage here should be the same as the battery voltage, it ought not to differ by more than about 1 Volt.
Checking For Short-Circuit to Power Supply
Checking For Short-Circuit To Power Supply
1
Disconnect the fuse from the system to be checked.
2
Connect one of the voltmeter's leads to B+.