900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
Installation
1. Install the cable lug to the handbrake switch.
2. Install the handbrake and tighten the two securing bolts.
3. Install the center console and driver seat.
4. Raise the car and install the rubber gaiter and the link rod to the cable. Install the cable equalizer to the pull rod and the adjustment nuts to the
measured thread length.
5. Install the cable to the levers.
6. Install the front guide sleeve to the bracket on the right-hand side.
7. Install the rear guide sleeves.
8. Install the lever return springs.
9. Install the heat shield panel.
10. Lower the car and check the handbrake operation.