900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
Daytime Running Lamp: Description and Operation
On cars for certain markets, the dipped beams serve as daylight driving lights.
Depending on how the ICE control module is programmed, the lamps light up when the ignition switch is turned to the Drive position.
The parking lights, rear lights and number plate lamp will also light up.
Depending on the programming of the ICE control module, dipped beam filaments 12 will be supplied with current when ignition switch 20 is in the
Drive position and the lights switch is in position 0 or 1.
Current is supplied to pin 63 of the ICE control module via fuse 15 and lights switch 10 (position 0), with the result that the ICE control module grounds
lighting relay 8 and the daylight driving lights come on.
The parking lights are also lit when the daylight driving lights are on, see also the "Parking Lights".
Cars for certain markets have an indicator lamp (47V) which shows when the daylight driving lights are on.
Should one of the dipped beam filaments fail, the dipped beam relay in the filament monitor will operate and terminal C2 will be grounded.
Since pin 4 of the SID unit is grounded, the "DEFECTIVE LAMP" indicator lamp or the INFO DISPL lamp in the main instrument display panel will
light up.
