900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
24
25
26
34
2
60A
Supplies the fuses in the dashboard directly:
2
5
10
12
16
27
28
35
3
60A
Supplies ignition switch 20 directly
4
60A
Supplies ignition switch relay 21 directly
5
60A
Supplies heat plates
Cables and Leads
The cables are marked with a cable code consisting of three parts
P15-5 YE/GY 2.5
Where:
The first part is the item number.
The second part is the color code.
The third part is the conductor cross-section area in Sq.mm.
Item Number
Every lead is designated by a letter followed by a number.
Leads with the same number such as E110, E110-1, E110-2 etc, normally
belongs to the same sub-system.
Conductor Cross-Section Area
The cross section area of the conductor is specified in Sq.mm and determines the current the cable is capable of carrying.
General Information
Safety Instructions
WARNING
Although system voltage is only 12 V, burn injuries may be caused by flash-over or fire in the car, since the energy content of the battery is very high.
short-circuit could give rise to extremely high currents.
WARNING - High voltage!
The electronic ignition system operates at voltages higher than 48,000 V. Such voltages may be fatal to persons with a weak heart and those who have a
pacemaker. So treat the entire ignition system with great respect.
Before Starting Work On The Electrical System
^
take off your wrist-watch and any rings you may be wearing
^
disconnect one of the battery terminals if any electrical components are to be removed
^
always follow the instructions and recommendations.