900 Turbo Convertible L4-1985cc 2.0L DOHC Turbo EFI (1994)
Technical Service Bulletin # 12950651
Date: 951201
Gear Position Sensor/Selector Cable - Adjustment
CATEGORY
Transmission
SECTION
4
ISSUE
12/95-0651
PAGE
34
CODE
432
Subject:
Adjustment of Gear Position Sensor and Gear Selector Cable
Application:
1994- 900 with Automatic Transmission
This bulletin contains a revised repair procedure with a new tool that makes it simpler to adjust the gear position and gear position sensor on 1994- 900
models with automatic transmission.
Cars Affected:
1994- 900 Models with automatic transmission
Parts:
Adjusting tool
87 92 467*
Acid-free petroleum jelly
source locally
* Adjusting tool, P/N 87 92 467, has been designated as non-essential. It is available for purchase from Kent-Moore by calling the Kent-Moore order
desk at 1-800-345-2233.
Action 1: Adjusting the Gear Position Sensor
1.
Clean the area around the transmission filler pipe and the gear position sensor.
2.
Read and record any diagnostic trouble codes.
3.
Record the radio code and disconnect and remove the battery.
4.
Remove the power steering pump pipe attachment bracket.