saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Keyless Entry|Testing and Inspection > < Hood Sensor/Switch (For Alarm)|Locations|Page 10424
Page 1
background image

Keyless Entry: Description and Operation

Keyless Entry System Description and Operation

The keyless entry system is a vehicle entry device. The keyless entry system is used in conjunction with the door locks to unlock the vehicle. Keyless
entry will lock/unlock the doors when a corresponding button on the remote-key is pressed. This is accomplished by the remote-key is sending a radio
frequency to the steering column module (CIM). The CIM interprets the signal and activates the requested function. A low remote-key or vehicle battery
or radio frequency (RF) interference from aftermarket devices, such as 2-way radios, power inverters, computers, etc., may cause a system malfunction.
High RF traffic areas may also cause interference that could lead to a malfunction. Keyless entry allows you to operate the following components:

*

Door locks

*

Illuminated entry lamps

The keyless entry system has the following components:

*

Remote-key

*

CIM

Remote-Key

The remote-keys are used to lock and unlock the vehicle door while away from the immediate are of the vehicle. Up to 5 remote-keys may be
programmed to a single vehicle.

Steering Column Module (CIM)

The CIM is a multifunction module that operates the keyless entry system. When an RF message is received from a remote-key, the CIM interprets this
signal performs the specific function, i.e. door lock, door unlock, etc.

Unlock Driver Door Only

Momentarily press the remote-key UNLOCK button in order to perform the following functions:

*

Unlock the vehicle doors

*

Unlock the liftgate

*

Disarm the content theft deterrent (CTD) system

*

Deactivate the CTD system when in the alarm mode

Lock All Doors

Press the remote-key LOCK button to perform the following functions:

*

Lock all vehicle doors

*

Arm the content theft deterrent (CTD) system

Keyless Entry|Testing and Inspection > < Hood Sensor/Switch (For Alarm)|Locations|Page 10424