Astra L4-1.8L (2009)
5. Remove the impact bar (3).
*
Remove the windshield washer reserve tank bolt (2).
*
Remove the 4 nuts and 4 bolts (1).
Installation Procedure
Note: Observe protective wax corrosion protection measures.
1. Seal the cavity.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Use NEW nuts
2. Install the impact bar.
*
Install the 4 bolts/nuts.
Tighten the 4 nuts to 20 Nm (15 lb ft).
*
Tighten the windshield washer reserve tank bolt.