saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Front Side Door Inside Handle Bezel Replacement|Page 11171 > < Front Side Door Inside Handle Bezel Replacement|Page 11169
Page 5
background image

5. Remove the front side door trim panel.

*

Release the 5 clips.

*

Disconnect the wiring harness plug.

*

Disconnect the cable inside door actuator (arrows).

*

Remove the door trim panel.

Installation Procedure

1. Insert the front side door trim panel.

*

Connect the wiring harness plug.

*

Connect the cable, door actuation from inside.

*

Install the 5 clips.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the front side door trim panel.

Tighten the 7 bolts to 1.5 Nm (13 lb in).

3. Install the upper extension trim.

*

Connect the wiring harness plug.

*

Install the 3 clips.

4. Install the trim door panel actuator.
5. Install the front door pull handle.

Front Side Door Inside Handle Bezel Replacement|Page 11171 > < Front Side Door Inside Handle Bezel Replacement|Page 11169