Astra L4-1.8L (2009)
1. Position the window downwards.
2. Position the window in window regulator guide.
2. Install the window channel on the inner door frame.
Rivet on 2 rivets.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Guide the window to position the fastening bolts align with the mounting holes.
3. Fasten the front door window and tighten the 2 bolts to 7 Nm (62 lb in).
1. Position the window regulator arm in the window guide.
2. Guide the window upwards and place evenly in weatherstrip and tighten the 2 bolts to 7 Nm (62 lb in).
4. Position the rear window channel.
5. Install the rear window channel.
Rivet on 2 rivets.
6. Install the belt outer sealing strip.
1. Install fastening clip on the outer window frame.
2. Install window channel strip in the window channel bracket.
3. Install the window channel strip onto the door folding.
7. Install the water vapor barrier.
1. Install the external mirror wiring harness.
2. Replace the 2 cable brackets.
3. Install the 2 holding angles.
4. Install the 2 pins.
8. Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement (Coupe) (See: Front Door Panel/Service and Repair
)Front Side Door Trim Panel Replacement (Sedan) (See: Front Door Panel/Service and Repair).
9. Close the window.