Astra L4-1.8L (2009)
4. Install the driver knee bolster of the I/P padding.
Tighten the 2 plugs.
5. Install the air inlet screen. Refer to Air Inlet Screen Replacement (See: Heating and Air Conditioning/Air Duct/Service and Repair/Air Inlet
Screen Replacement).
Note: Ensure that the cable has no kinks.
6. Route the cable.
7. Install the cable to the hood closure.
*
Install the cable to the hood latch.
*
Attach the clamp.
*
Install the bolt.
Note: Adjust the cable so that there is no clearance where the end nipple rests against the hood closure.
8. Adjust the cable.
The hood closure must return to its initial position after installation from any setting.
