Astra L4-1.8L (2009)
1. Connect and latch the compact connector.
2. Insert the seat in the front guide.
Note: Use the screw locking compound.
12. Fasten the driver side front seat and tighten the 2 bolts to 35 Nm (26 lb ft).
Note: Use the screw locking compound.
13. Install the driver side seat belt and tighten the bolt to 20 Nm (15 lb ft).
14. Insert the driver side front seat panel.
Place the front seat in original position.
15. Insert the passenger side front seat.
1. Connect and latch the compact connector.
2. Insert the seat in the front guide.
Note: Use the screw locking compound.
16. Fasten the passenger side front seat and tighten the 2 bolts to 35 Nm (26 lb ft).
Note: Use the screw locking compound.
17. Install the passenger side seat belt and tighten the bolt to 20 Nm (15 lb ft).
18. Insert the passenger side front seat panel.
Reposition the front seat to the original position.
19. Install the rear bench seat.
Insert the rear seat cushion and position.
20. Connect the battery.
21. For programming procedures, refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
