saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Procedures|Page 11834 > < Procedures|Page 11832
Page 2
background image

Note:  For better guidance with the installation, the water drain hose is to be provided with a cord.

3. Remove the water drain hose front.

1. Remove the water drain hose from sunroof.
2. Remove the water drain hose from the A-pillar bottom.

Installation Procedure

1. Install the water drain hose front.

1. Connect the water drain hose with cord.
2. Draw in water drain hose in A-column carefully with the help of the cord.
3. Remove the cord and install the water drain hose to the sunroof.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the wing protective paneling inner.

Install the 8 body-bound rivets.

Tighten the 2 wheelhouse liner bolts to 2.5 Nm (22 lb in).

3. Install the molded headlining. Refer to Headlining Trim Panel Replacement (Sedan)   (See: Interior Moulding / Trim/Headliner/Service and Repair

Procedures|Page 11834 > < Procedures|Page 11832