Astra L4-1.8L (2009)
Note: For better clarity, the connecting rod is shown on the seat mount with the upholstery removed (1).
4. Remove the connecting rod.
*
Remove the cover cap (2).
*
Remove the rod (3).
Installation Procedure
1. Install the connecting rod.
*
Insert the rod.
*
Install the cover cap.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the interior paneling.
Insert the paneling.
Tighten the bolt to 2.5 Nm (22 lb in).
3. Install the star handle to the seat backrest.
Install the adjusting wheel.