Astra L4-1.8L (2009)
2. Install the 4 rivets.
2. Install the release handle panel seat backrest.
3. Install the upholstery covering.
Position the upholstery covering.
4. Install the 7 clamps.
5. Install the head restraint guide sleeve.
Engage the 2 head restraint guide sleeves (audible click).
6. Insert the surrounding upholstery covering.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
7. Install the left bracket.
Tighten the 2 bolts to 25 Nm (18 lb ft).
8. Install the rear seat backrest cover.
Install the 9 clips.
9. Install the headrest.
10. Insert the rear seat backrest.
11. Install the rear seat backrest.
*
Tighten the 2 side bolts to 20 Nm (15 lb ft).
*
Tighten the screw at the back to 20 Nm (15 lb ft).
12. Fold down the rear seat backrest.
Note: Use screw locking compound.
13. Insert the seat belt buckle.
Tighten the front screw to 20 Nm (15 lb ft).
14. Install the rear seat.
15. Insert the rear seat cushion and position.
Rear Seat Back Center Cushion Latch Replacement
Rear Seat Back Center Cushion Latch Replacement
Removal Procedure
