Astra L4-1.8L (2009)
10. Remove the upholstery covering.
Remove the 7 clamps.
Remove the upholstery covering.
Installation Procedure
1. Install the upholstery covering.
Position the upholstery covering.
Install the 7 clamps.
2. Install the head restraint guide sleeve.
Engage the 2 head restraint guide sleeves (audible click).
3. Insert surrounding upholstery covering.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the left bracket.
Tighten the bolt to 25 Nm (18 lb ft).
5. Install the right bracket.
Tighten the 2 bolts to 25 Nm (18 lb ft).
6. Install the rear seat back cushion cover.
Install the 9 clips.
7. Install the headrest.
8. Insert the rear seat backrest.
Note: Use screw locking compound.
9. Install the rear seat back cushion.
*
Tighten the 2 side bolts to 20 Nm (15 lb ft).
*
Tighten the screw at the back to 20 Nm (15 lb ft).
10. Fold down rear seat back cushion.
11. Insert the seat belt buckle.
Tighten the front screw to 20 Nm (15 lb ft).
12. Install the rear seat.
