Astra L4-1.8L (2009)
7. Remove the lock panel.
Remove the 2 bolts (1).
8. Remove the upholstery covering.
Remove the upholstery covering all the way around.
9. Remove the upholstery padding.
Installation Procedure
1. Install the upholstery padding.
Insert the pad.
2. Install the upholstery covering.
Position the upholstery covering.
3. Insert the surrounding upholstery covering.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the lock panel.
Tighten the 2 bolts to 25 Nm (18 lb ft).
5. Install the head restraint guide sleeve.
Engage the 2 head restraint guide sleeves (audible click).
6. Install the brackets, right and left.
Tighten the 2 bolts to 25 Nm (18 lb ft).
7. Install the rear seat back cushion cover.
8. Install the 11 clips.
9. Install the head restraints.
10. Insert the rear seat back cushion.
Note: Use screw locking compound.
11. Install the rear seat back cushion.
Tighten the 2 screws at back 20 Nm (15 lb ft).
12. Fold down the rear seat back cushion.
Note: Use screw locking compound.
