Astra L4-1.8L (2009)
10. Remove the upholstery covering.
1. Remove the 7 clamps.
2. Remove the upholstery covering.
Installation Procedure
1. Install the upholstery covering.
1. Position the upholstery covering.
2. Install the 7 clamps.
2. Install the seat belt panel.
3. Install the head restraint guide sleeve.
Engage the 2 head restraint guide sleeves (audible click).
4. Insert the surrounding upholstery covering.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the left and right brackets.
Tighten the 3 bolts to 25 Nm (18 lb ft).
6. Install the rear seat backrest cover.
Insert the 9 clips.
7. Install the headrest.
8. Insert the rear seat back cushion.
9. Install the rear seat back cushion.
Tighten the screw at back to 20 Nm (15 lb ft).
Note: Use screw locking compound.
10. Fold down the rear seat backrest.
Insert the seat belt buckle.
*
Tighten the 2 side bolts to 20 Nm (15 lb ft).
*
Tighten the 2 front bolts to 20 Nm (15 lb ft).
11. Insert the rear seat cushions and lock.
